Filter
Top Products
1-8
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-8 (seq: 26)
This is the black on page 1-8 (seq: 26)
Before handling a memory module, either put on a grounding wrist strap and
attach the end to the metal chassis of the plotter, or touch the outer metal
surface of the plotter with your hand. Otherwise, static electricity from your
body could damage the memory module.
3 Take the memory module out of its bag, holding the module only by the edges.
4
a Hold the module by its
edges with the
nonmetallic edge toward
you and the small notch
at the bottom.
b With the nonmetallic
edge angled to the right,
firmly push the module
into the slot. Gradually
straighten the angle and
push it in until it clicks
into place.
1846
Grounding
Wrist Strap
5
Using a flat-blade screwdriver, replace the cover plate and its four screws.
1845b
Setting Up the Plotter
Task 2: (Optional) Install Memory Expansion Module
CAUTION