Filter
Top Products
1-23
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-23 (seq: 41)
This is the black on page 1-23 (seq: 41)
3 When the cartridges are successfully installed, the plotter automatically runs the
cartridge alignment procedure. When the front-panel displays
STATUS / Ready,
the procedure is complete. You can throw away the small print produced during
the cartridge alignment procedure.
To make your cartridges last as long as possible, you should not remove them once
they are installed, except to replace them.
Now that the cartridge(s) are loaded, never turn the plotter upside down, or
ink will spill.
Setting Up Your Plotter
Task 5: Load the Print Cartridge(s)
SETUP
1
C A U T I O N