Filter
Top Products
Avoid paper jams
To help avoid paper jams, follow these guidelines.
● Remove printed papers from the output tray frequently.
● Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.
● Ensure that paper loaded in the input tray lays flat and the edges are not bent or
torn.
● If you are printing labels, ensure that the label sheets are no more than two years
old. Labels on older sheets might peel off when the paper is pulled through the
HP All-in-One, and cause paper jams.
● Do not combine different paper types and paper sizes in the input tray; the entire
stack of paper in the input tray must be the same size and type.
● Adjust the paper-width guide in the input tray to fit snugly against all paper. Make
sure the paper-width guide does not bend the paper in the input tray.
● Do not force paper too far forward in the input tray.
● Use paper types that are recommended for the HP All-in-One.
Make a copy
You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down in the right front corner of the glass.
3. Press Start Copy Black or Start Copy Color to begin copying.
Scan an image
You can start a scan from your computer or from the HP All-in-One. This section explains
how to scan from the control panel of the HP All-in-One only.
To use the scan features, the HP All-in-One and computer must be connected and turned
on. The HP All-in-One software must also be installed and running on your computer
prior to scanning. To verify that the HP All-in-One software is running on a Windows
computer, look for the HP All-in-One icon in the system tray at the lower right side of the
screen, near the time.
Basics Guide 61
Use the HP All-in-One features