Filter
Top Products
3. Press to highlight Original Type.
4. Press
to highlight one of the following options, and then press OK:
– If you want the HP All-in-One to automatically determine whether slides or film
are loaded in the Slide and Negative Film holder, select Automatic.
– If you have color negative film loaded in the Slide and Negative Film holder,
select Color Negatives.
– If you have slides loaded in the Slide and Negative Film holder, select Slides.
– If you have black and white negative film loaded in the Slide and Negative Film
holder, select B/W Negatives.
Note The Original Type setting reverts to Automatic after the scan is
completed.
Print 10 x 15 cm (4 x 6 inch) photos
You can select specific photos on your memory card or storage device to print as 10 x
15 cm (4 x 6 inch) photos.
To print one or more 10 x 15 cm (4 x 6 inch) photos
1. Insert a memory card into the appropriate slot on the HP All-in-One, or connect a
storage device to the front USB port.
Turn the memory card so that the label faces left and the contacts are facing the
HP All-in-One, and then push the card forward into the appropriate slot until the
Photo light turns on.
The HP All-in-One supports the memory cards described below. Each type of
memory card can only be inserted in the appropriate slot for that card.
– Top left: CompactFlash (I, II)
– Top right: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card
Basics Guide 65
Use the HP All-in-One features