HP (Hewlett-Packard) CQ113A#B1K All in One Printer User Manual


 
Select Printer color management.
Click Print.
11. Check the Adobe InDesign Print settings.
Setup (left-hand menu):
Paper Size: select Defined By Driver.
Options: select whatever scaling option you need.
Output (left-hand menu):
Color: select Composite RGB.
Color Management (left-hand menu):
Print: select Document.
Options > Color handling: select PostScript® Printer Determines Color.
Click Print.
Proof the output on the printer (QuarkXPress, PS driver)
This example uses QuarkXPress 7 under Mac OS, with the PostScript driver. Color management is
done by the printer's internal PostScript RIP.
The aim in this example is to create a concept proof of a press—in this case a Europe ISO Coated
FOGRA27 press. QuarkXPress will convert the document and its images to the ISO Coated space
and send it to the printer, which will convert it to its final colors emulating such a press. So there are
two stages of color conversion involved.
1. Initial recommendations:
Choose an appropriate paper type for the purpose.
The paper type should be calibrated and profiled with the printer and the print-quality level
that you intend to use. See
Color calibration on page 66 and Color profiling on page 67.
For a correct preview of the printed image, the monitor should also be profiled.
2. Open QuarkXPress 7.
3. From the Edit menu, select Color Setups > Source > New, and choose a Name to identify your
custom Source Setup.
4. Select the RGB tab.
Solid Colors > Profile: select Adobe RGB (1998).
Solid Colors > Rendering Intent: select Relative Colorimetric or Perceptual.
Pictures > Profile: select Adobe RGB (1998).
ENWW Color management scenarios 93
Color management