Filter
Top Products
1. Remove the right-hand end of the spindle from the printer, then the other end.
WARNING! Do not insert your fingers into the spindle supports during the removal process.
2. The spindle has a stop at each end to keep the roll in position. The blue stop can be removed to
mount a new roll; it slides along the spindle to hold rolls of different widths. Remove the blue
paper stop from the end of the spindle.
3. If your roll has a 76 mm (3 in) cardboard core, ensure that the core adaptors have been
installed.
4. If the roll is long, rest the spindle horizontally on a table and load the roll on the table.
26 Chapter 4 Paper handling ENWW
Paper handling