Filter
Top Products
connected to the port labeled 1-LINE on the back of the printer and the other
end to your telephone wall jack, as shown in the illustration.
1
2
1 Telephone wall jack
2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE"
port
If the phone cord that came with the printer is not long enough, you can use
a coupler to extend the length. You can purchase a coupler at an electronics
store that carries phone accessories. You also need another phone cord, which
can be a standard phone cord that you might already have in your home or
office.
• Try connecting a working phone and phone cord to the telephone wall jack that
you are using for the printer and check for a dial tone. If you do not hear a dial
tone, call your local telephone company for service.
• Other equipment, which uses the same phone line as the printer, might be in
use. For example, you cannot use the printer for faxing if an extension phone is
off the hook, or if you are using a computer dial-up modem to send an email or
access the Internet.
• Check to see if another process has caused an error. Check the display or your
computer for an error message providing information about the problem and
how to solve it. If there is an error, the printer cannot send or receive a fax until
the error condition is resolved.
Solve fax problems 105