HP (Hewlett-Packard) CZ152A#B1H All in One Printer User Manual


 
supplies. Click the button below the message to view Rewards online. Rewards may not be
available in all regions.
WARNING! HP's ink cartridge warranty does not cover non-HP ink or cartridges. HP's
printer warranty does not cover repairs or service due to use of non-HP cartridges or ink. HP
does not guarantee the quality or reliability of non-HP ink. Information about ink levels will not
be available.
Use SETUP cartridges
When you first setup the printer, you must install the cartridges that shipped in the box with the
printer. These cartridges are labeled SETUP, and they calibrate your printer before the first print
job. Failure to install the SETUP cartridges during the initial product setup causes an error. If you
installed a set of regular cartridges, remove them and install the SETUP cartridges to complete
printer setup. After printer setup is complete, the printer can use regular cartridges.
WARNING! You must replace the orange caps on the regular cartridges you remove, or they
will quickly dry out. Do not open or uncap cartridges until you are ready to install them.
Leaving caps on the cartridges reduces ink evaporation. You can use the orange caps from
the SETUP cartridges if necessary.
Click here to go online for more information .
Do not use SETUP cartridges
SETUP cartridges cannot be used after the printer has been initialized. Remove and install non-
SETUP cartridges. For more information, see
Replace the ink cartridges.
Not enough ink at startup
The used cartridges listed in the message might not have enough ink to complete one-time
startup processes.
Solution: Install new cartridges or click OK to use installed cartridges.
If startup cannot complete with installed cartridges, new cartridges will be needed. For information
on how to install new cartridges, see
Replace the ink cartridges.
Not enough ink at startup 213