Filter
Top Products
• Do not overload the tray or ADF. For more information, see Load media or Load an
original in the automatic document feeder (ADF).
• To prevent jams, poor print quality, and other printing problems, avoid loading the
following media in the trays or ADF:
◦ Multipart forms
◦ Media that is damaged, curled, or wrinkled
◦ Media with cutouts or perforations
◦ Media that is heavily textured, embossed, or does not accept ink well
◦ Media that is too lightweight or stretches easily
◦ Media that contains staples or clips
NOTE: To scan, copy, or fax documents that contain pages that do not
conform to these guidelines, use the scanner glass. For more information, see
Load an original on the scanner glass.
Load an original on the scanner glass
You can copy, scan, or fax originals by loading them on the scanner glass.
NOTE: Many of the special features do not work correctly if the glass and lid
backing are not clean. For more information, see
Maintain the printer.
NOTE: Remove all originals from the document feeder tray before lifting the lid on
the printer.
To load an original on the scanner glass
Use these steps to load an original on the scanner glass.
1. Lift the scanner lid.
2. Load your original print-side down.
TIP: For more help on loading an original, refer to the engraved guides along
the edge of the glass.
Chapter 1
18 Get started