Filter
Top Products
Operation66
TapeAlert Mode Specifies conditions for logging and reporting the
following Tape Alert data options. The default is
Unconditionally Generate Recovered Error.
• Logging Disabled: Inhibits the logging
feature.
• No Exceptions: The library must not report
information exceptions.
• Generate Unit Attention: Reports
information exceptions with a Unit Attention
sense key and an ASC/ASCQ of 5D/00.
• Conditionally Generate Recovered Error:
Reports information exceptions with a
Recovered Error sense key and an
ASC/ASCQ of 5D/00, if Recovered Error
Reporting is enabled.
• Unconditionally Generate Recovered
Error: Unconditionally reports information
exceptions with a Recovered Error sense key
and an ASC/ASCQ of 5D/00.
• Generate No Sense: Reports information
exceptions with a No Sense sense key and an
ASC/ASCQ of 5D/00.
• Report on Unsolicited Request Sense:
Reports information exceptions with a No
Sense sense key and an ASC/ASCQ of
5D/00, only in response to an unsolicited
REQUEST SENSE command.
Abort Move Status Lets you specify the SCSI response while aborting a SCSI
command. The possible settings are Busy or Not Ready.
The default is Not Ready.
Door Open Response Lets you specify the SCSI response when a library door is
open. The settings are Ready or Not Ready. The default is
Not Ready.
Initiate Wide Data
Transfer Negotiation
Lets you enable the library to initiate a SCSI synchronous
and wide data transfer negotiation with the host. The
settings are Do Not Initiate or Initiate. The default is Do
Not Initiate.
Table 6 View SCSI Options (continued)
Option Description