Filter
Top Products
ENWW Resolving control-panel messages 119
Resolving control-panel messages
Message Explanation or recommended action
Access Denied
MENUS LOCKED
The printer control-panel function you are trying to access has been locked to
prevent unauthorized access.
See your network administrator.
ACTION NOT CURRENTLY
AVAILABLE FOR TRAY X
Tray size cannot be
ANY SIZE/ANY CUSTOM
A duplexed document was requested from a tray that is set to Any Size or Any
Custom. Duplexing is not allowed from a tray configured to Any Size or Any
Custom. Select another tray or reconfigure the tray.
BAD DUPLEXER
CONNECTION
For help press
The duplex printing accessory is not connected properly to the printer.
Turn the printer off and reinstall the duplex printing accessory.
Bad Optional tray
connection
The optional tray is not connected properly to the printer. Turn the printer off
and reinstall the optional tray.
BAD TRAY 1 CONNECTION
For help press
Optional Tray 1 is not connected properly to the printer.
Turn the printer off and reinstall optional Tray 1.
<BINNAME> FULL
Remove all paper from
bin
The specified output bin is full.
Empty the bin to continue printing.
CANCELING... The printer is cancelling a job. The message continues while the job is stopped,
the paper path is flushed, and any remaining incoming data on the active data
channel is received and discarded.
CARD SLOT X NOT
FUNCTIONAL
For help press
The compact flash card in the specified slot is not working correctly.
CARTRIDGE FAILURE
For help press
alternates with
Return for
Replacement
Cartridge is loaded and the shipping protection strip cannot be fully removed.
Return the cartridge for a new one. (See the HP support flyer or go to
www.hp.com/support/lj9050_lj9040.)
Checking paper
path
The engine is rotating its rollers to check for possible paper jams. Some pages
might be ejected.
CHOSEN PERSONALITY
NOT AVAILABLE
To continue press
alternates with
For help press
A print job requested a printer language (personality) that does is not available
with this printer. The job will not print and will be cleared from memory.
Print the job using a driver for a different printer language, or add the requested
language to the printer (if available).