Filter
Top Products
172 Appendix B Control-panel menus ENWW
RESOLUTION=
FASTRES 1200
300
600
FASTRES 1200
Select the resolution from the following values:
300: Produces draft print quality at maximum printer speed.
300 dpi (dots per inch) is recommended for some bitmapped fonts
and graphics, and for compatibility with the HP LaserJet III family
of printers.
600: Produces high print quality at maximum product speed.
FASTRES 1200: Produces optimum print quality (comparable to
1200 dpi) at maximum product speed.
Note
It is best to change the resolution from the driver or software
application. (Driver and software settings override control-panel
settings.)
RET=MEDIUM OFF
LIGHT
MEDIUM
DARK
Use printer Resolution Enhancement technology (REt) setting to
produce print with smooth angles, curves, and edges.
All print resolutions, including FastRes 1200, benefit from REt.
Note
It is best to change the REt setting from the driver or software
application. (Driver and software settings override control-panel
settings.)
ECONOMODE ON
OFF
When set to ON, the printer prints with a reduced amount of toner
per page; however, the print quality of the page is drastically
reduced.
TONER
DENSITY=3
1 to 5 Lighten or darken the print on the page by changing the toner
density setting. The settings range from 1 (light) to 5 (dark), but the
default setting of 3 usually produces the best results.
Note
It is best to change the toner density from the driver or software
application. (Driver and software settings override control-panel
settings.)
SMALL PAPER
MODE=NORMAL
NORMAL
SLOW
When printing narrow media the part of the fuser rollers that do not
make contact with the media swell up and can cause wrinkles.
Item Values Explanation