Filter
Top Products
170 Appendix B Control-panel menus ENWW
PCL submenu
COURIER
FONT=REGULAR
REGULAR
DARK
Select the version of Courier font to use:
REGULAR: The internal Courier font available on the
HP LaserJet 4 Series printers.
DARK: The internal Courier font available on the
HP LaserJet III Series printers.
Both fonts are not available at the same time.
WIDE A4=NO YES
NO
The Wide A4 setting changes the number of characters
that can be printed on a single line of A4 paper.
YES: Up to 80 10-pitch characters can be printed on one
line.
NO: Up to 78 10-pitch characters can be printed on one
line.
PRINT PS
ERRORS=OFF
ON
OFF
Select ON to print the PS error page when PS errors occur.
PRINT PDF
ERRORS= OFF
OFF
ON
Select ON to print the PDF error page when PDF errors
occur.
Item Values Explanation
FORM LENGTH=60 5 to 128 Sets vertical spacing from 5 to 128 lines for default paper
size. Enter the value using the numeric keypad.
ORIENTATION=
PORTRAIT
PORTRAIT
LANDSCAPE
Allows the user to select default page orientation.
Note
It is best to set the page orientation from the printer driver
or software application. (Driver and software settings
override control-panel settings.)
FONT
SOURCE=INTERNAL
INTERNAL
CARD SLOT X
INTERNAL: Internal fonts.
SLOT 1, 2, or 3: Fonts stored in one of the three DIMM
slots.
FONT NUMBER=0 0-999 The printer assigns a number to each font and lists them
on the PCL Font List (See PCL or PS font list). The font
number appears in the Font # column of the printout.
FONT PITCH=10.00 0.44 to 99.99 Using the numeric keypad or and , enter a value.
This item might not appear, depending on the font
selected.
SYMBOL SET=PC-8 Variety of
available symbol
sets
Select any one of several available symbol sets from the
printer control panel. A symbol set is a unique grouping of
all the characters in a font. PC-8 or PC-850 is
recommended for line draw characters.
Item Values Explanation