Filter
Top Products
Trakker Antares 243X Hand-Held Terminal User’s Manual
nugget
39
1-6
Accessories for the Terminals
You can use these accessories (sold and ordered separately) with the 243X:
Vehicle Dock The vehicle dock is available in a standard model (Part No. 071805)
and a powered model (Part No. 071695). This accessory allows you to easily mount
the 243X to a variety of surfaces.
Z2400 Battery Charger The battery charger (Part No. Z2400A) lets you charge up to
four lithium-ion battery packs at one time. The battery charger senses when a battery
pack is fully charged and will not overcharge it, ensuring long and consistent battery
pack life.
Handle The detachable pistol-grip handle (Part No. 067802) provides a convenient
way to hold the terminal and use trigger-activated scanning.
External Power Supply The external power supply (Part No. 065236) allows you to
power the terminal and charge the battery pack. The power supply comes with a North
American power cord. If you are using the terminal outside North America, you need
to purchase the appropriate power cord for your local power supply.
External Power Supply Adapter Cable The external power supply adapter cable (Part
No. 071776) is shipped with the 243X. Use this cable to connect the 243X to the
external power supply.
Serial Adapter Cable The serial adapter (Part No. 216-807-001) allows the 243X to
communicate with a host computer or other serial device through the serial port.
Cloning Cable The cloning cable (Part No. 216-909-001) allows you to connect two
243X terminals so that you can use the clone application to copy configuration
parameters from one 243X to another 243X.