Filter
Top Products
Trakker Antares 243X Hand-Held Terminal User’s Manual
nugget
39
2-4
Current This configuration, also called the runtime configuration, uses the
configuration that is saved in RAM. When you change a parameter by using the menu
system, by scanning a bar code, by sending it from a host application, or by sending it
from the DCS 30X, the terminal updates the current configuration. The changes to the
current configuration are lost when you boot or reset the terminal.
Active When you update the flash memory, the terminal copies the current
configuration to the active configuration. The active configuration is the configuration
that the terminal uses when you boot or reset the terminal.
Default This configuration is the factory default configuration. To restore the default
configuration, see “Restoring the Terminal’s Default Configuration” in Chapter 2 of the
2400 Family system manual.
Configuring the Terminal With the Menu System
The TRAKKER Antares 2400 Menu System is a menu-driven application that lets you
configure the terminal, manage files, view system information, and run diagnostics. You
can access the TRAKKER Antares 2400 Menu System while running any application.
When you are using the menu system, you may not see a parameter until you set a value
for another key field. For example, EOM is a key field when you configure the
Configurable protocol. That is, several fields are invalid (do not appear) until you
enable EOM. You also may not see a parameter if your terminal does not support a
particular feature.
To access the TRAKKER Antares 2400 Menu System
•
Press (57-key keypad), (39-key
keypad), or scan this bar code:
Menu System
*..-.*
*..-.*
The Main Menu appears, displaying four menu options.
Configuration Menu
Choose this menu to configure
bar code symbologies, network and communications
parameters, serial port parameters, and the terminal’s
operating characteristics. In the Symbologies Menu,
active symbologies are noted with an asterisk (*).
Diagnostics Menu
Choose this menu to run
hardware, software, or system diagnostics to help
analyze and fix problems. You can also view battery
and system information. For help, see Chapter 4,
“Running Diagnostics” in the 2400 Family system
manual.
MAIN MENU
Configuration Menu
Diagnostics Menu
System Menu
About TRAKKER 2400
_` Select item
[Enter] Next screen
[F1] Help
[Esc] Exit
243XU050.eps