Filter
Top Products
nugget
39
Learning About the Terminal
1-25
1
Note:
The serial/power connector and the input device connector lead to the same serial
port, COM1. Do
not
connect more than one serial device to the 243X.
To connect the 243X to a serial device using the serial/power connector
1.
Attach a serial device to the serial adapter cable (Part No. 216-807-001) (sold and
ordered separately).
2.
Connect the serial adapter cable to the serial/power connector on the 243X.
To connect the 243X to a serial device using the input device connector
1.
Attach a serial device to the RS-232 null-modem serial cable (Part No. 070268)
(sold and ordered separately).
2.
Connect the serial cable to the input device connector on the 243X.
You can transfer data between the 243X and the serial device. For help, see “Using
Serial Communications on the Terminal” in Chapter 3.
Defining the Terminal’s Drives
The terminals come with the following memory and drives. On each drive, filenames
are customer defined using eight characters with a three-character extension. You
cannot define any subdirectories.
Drive D or font set
Drive C
Drive E
Drive G
243X030.eps
Drive C
Drive C
Drive D or font set
Drive E
2435
2430
2MB flash drive/
font set
2MB flash drive/
font set
750K flash
drive
750K flash
drive
256K
configurable
RAM drive
256K configurable
RAM drive
Optional 2MB or
4MB extended
storage drive