Filter
Top Products
Trakker Antares 243X Hand-Held Terminal User’s Manual
nugget
39
2-10
Exiting the Menu System
1.
Press until you exit the TRAKKER Antares 2400 Menu System. If you have
made any changes to the current configuration, the next screen prompts you to save
the configuration parameters that are currently enabled on the terminal to RAM.
Save new
configuration
(in RAM)?
243XU052.eps
YES NO
CANCEL
2.
Choose Yes and press to save your changes in RAM and update the current
configuration on the terminal. The Main Menu appears.
Choose No and press to exit without changing the configuration. The Main
Menu appears.
Choose Cancel and press to return to the previous menu or screen.
3.
From the Main Menu press . If you have made any changes, the next screen
prompts you to store the changes in flash memory.
Store configuration
changes in flash
memory?
(used when rebooting
the terminal)
243XU054.eps
YES NO
CANCEL
Note:
You can also save the current configuration in flash memory by choosing the
Store Configuration command from the System Menu. For help, see “Saving
Configuration Changes in Flash Memory” in Chapter 2 of the 2400 Family system
manual.