Filter
Top Products
Appendix C. Specifications
This appendix provides hardware, environmental, primary power, and cooling
specifications and installation considerations for the 4560SLX Tape Library.
Hardware
The following tables provide the operational specifications, reliability, and physical
characteristics of the 4560SLX Tape Library.
Table 9. Operational specifications
Operational specifications 4560SLX Tape Library
Host SCSI interface LVD/SE
Drive configuration 0, 1, 2
Drive compatibility Quantum SDLT 320, LTO Ultrium 200
Number of cartridges 26 removable (SDLT) or 30 removable (LTO)
Maximum data capacity
(native)
>4.16 TB (SDLT), 3.00TB (LTO)
Maximum transfer rate
(native)
>57.6 GB/hr. (SDLT), 54 GB/hr. (LTO)
Mount time into drive <10 seconds, excluding cartridge elevator access
Dismount time from drive <10 seconds, excluding cartridge elevator access
Table 10. Reliability
Reliability 4560SLX Tape Library
Mean Time Between Failure
(MTBF)
>250,000 hours (excluding power supply, tape drives, and
cooling fans)
Mean Swaps Before Failure
(MSBF)
2,000,000 cartridge cycles
Design Life 7 yrs. @ 30% duty cycle
Mean Time to Repair (MTTR) <10 min (most FRUs)
Table 11. Physical characteristics (tabletop version)
Physical characteristics 4560SLX Tape Library
Height 8.75 in. (22.25 cm) nominal (5U)
Note: The rear rack enclosure door (if any) must provide
minimum of 3.0″ additional clearance from the rear of the
chassis for SCSI cables and fan housings.
Width 16.75 in. (22.23 cm)
Depth (including drive
handles)
31 in. (78.74 cm)
Weight
v Unpacked 67.0 lbs (30.40 kg) estimated (with 2 drives
installed)
v Packaged 99.0 lbs (44.91 kg) estimated
© Copyright IBM Corp. 2002 91