Filter
Top Products
5. Select the button next to the SCSI ID you want to set. The screen will display
the current setting as shown in Figure 24.
6. Enter a new value for the SCSI ID. This places your request in the New data
field.
7. Select Save. A confirmation screen appears on the display as shown in
Figure 25.
8. Select OK to confirm. The newly selected SCSI ID flashes for a few seconds
while the drive is being updated, then remains solid indicating that the
operation is complete.
Figure 23. SCSI ID selection screen
Figure 24. SCSI ID editing screen
Figure 25. SCSI ID Confirmation screen
22 4560SLX Tape Library: User’s Guide