Filter
Top Products
Tape drives
The 4560SLX Tape Library supports a 0-drive, 1-drive, or 2-drive configuration as
shown in Figure 6. All inactive tape drives are hot-swap capable. SCSI I/O is
accomplished through two VHDCI-series 68-pin SCSI connectors located on the
rear of the library directly under each tape drive as shown in Figure 7.
Library controller board
The library contains a rear-access adapter cage (see Figure 8 on page 7) and a PCI
backplane. This backplane contains the plug-in connectors for the library controller
board and FCO card.
1 Tape drive 1
2 Tape drive 2
Figure 6. Tape drive locations
1 Drive 1
2 Drive 2 bay
3 VHDCI 68-pin connectors
Figure 7. Tape drive connectors
6 4560SLX Tape Library: User’s Guide