Filter
Top Products
Table 3. SCSI configuration options (continued)
Definition O ption and default description Default value
Library SCSI Bus
Parity
This option enables you to set the library robotics
SCSI bus parity checking.
Enabled
SCSI Mode This option defines the loader as SCSI-2 or SCSI-3. SCSI-3
Mailslot access This option defines when the mailslot is accessible. Prevent/Allow
Medium
Command
Determines
Access
Unit Attention
Reporting
This option enables you to select reporting of all or
only one stacked-unit attention conditions. If set to
all, the unit reports all unit attention conditions in
sequence. If set to one, the unit reports only the
highest priority condition.
Report All
Init Element Status This option enables you to specify the library
response to the SCSI INITIALIZE ELEMENT
STATUS command. The possible settings are no
inventory, force inventory, and force label scan.
No Inventory
Test Unit Ready
Reporting
This option enables you to specify the response to a
TEST UNIT READY command if the library is in
sequential mode. The possible settings are standard
or custom. Standard returns check condition not
ready and custom returns good status.
Standard
Device Capability
Page Length
This option enables you to choose between two
lengths of the mode sense/select device capabilities
page (SCSI page 1Fh), which are short (14 bytes)
and long (18 bytes), to accommodate different SCSI
device implementations of this page.
Short (14 bytes)
Transport Element
Base Address
This option enables you to set the base address for
the robotics mechanism.
0
Storage Element
Base Address
This option enables you to set the base address for
the magazine slots.
20
Transfer Element
Base Address
This option enables you to set the base address for
the tape drives.
1E0
Import/Export
Element Base
Address
This option enables you to set the base address for
the mail slot.
1C0
Product
Identification
This option enables you to specify the response of
the library robotics to the SCSI INQUIRY command
in the product ID fields.
4560SLX
Vendor
Identification
This option enables you to specify the response of
the library robotics to the SCSI INQUIRY command
in the vendor ID field.
IBM
Post Recovered
Errors
This option enables you to set the post recovered
errors.
Disabled
Chapter 4. Operation 33