Filter
Top Products
Chapter 3. Library configuration
The library provides several configuration options to support a variety of
applications and platforms. The settings for each of the available options are stored
in non-volatile memory in the library. For most applications, you do not have to
change the default settings. However, if you need to change the configuration, use
the instructions provided in the following sections. If you are uncertain whether
you need to change a setting, contact your authorized service provider.
You can change configuration settings using the touch screen. For information on
operating the touch screen, see Chapter 4, “Operation” on page 27.
Setting a SCSI ID
Each tape drive installed in the library requires a unique SCSI ID.
To set a SCSI ID, complete the following procedure:
1. Turn the library on and wait until the Power-On Self Test (POST) completes.
The library default screen appears on the display as shown in Figure 22.
2. Select the Menu option.
3. Enter the appropriate password. For instructions on how to set passwords, see
“Passwords” on page 38.
4. Select SCSI in the Edit Options area to display the screen shown in Figure 23
on page 22.
Figure 22. Library default screen
© Copyright IBM Corp. 2002 21