Filter
Top Products
9. Press the Back button to return to the Main menu screen. Repeat this procedure
to set any remaining SCSI IDs.
Setting up reserved tape cartridge slots
You might want to reserve tape cartridge slots to meet licensing requirements or
dedicate them as cleaning slots.
Standard tape cartridge slots are numbered from the front of the magazine to the
rear as shown in Figure 27 on page 24. When you reserve a slot, it becomes
reserved slot #1 in the last slot of the magazine. Additional reserved slots are
added in a rear-to-front pattern. If your software license limits you to less than the
full magazine capacity, reserved slot #1 always follows the last unreserved data
tape cartridge.
Figure 26. Drive 1 Bus 3 Data Field screen
Chapter 3. Library configuration 23