Filter
Top Products
Monitor commands
The monitor commands are as follows:
v clearlog
v fans
v readlog
v syshealth
v temps
v volts
clearlog command
Description
Use the clearlog command to clear the event log of the Remote Supervisor
Adapter II or Remote Supervisor Adapter II SlimLine. You must have the authority to
clear event logs to use this command.
fans command
Description
Use the fans command to display the speed for each of the server fans.
Example
x345RSA> fans
fan1 75%
fan2 80%
fan3 90%
x345RSA>
readlog command
Syntax
readlog [options]
option:
-f
Description
Use the readlog command to display the ASM event log entries, five at a time. The
entries are displayed from the most recent to the oldest.
readlog displays the first five entries in the event log, starting with the most
recent, on its first execution, and then the next five for each subsequent call.
readlog -f resets the counter and displays the first 5 entries in the event log,
starting with the most recent.
Example
x345RSA> readlog -f
1 I SERVPROC 12/18/03 10:18:58 Remote Login Successful.
Login ID:’’USERID’ CLI authenticated from 192.168.70.231 (Telnet).’
2 I SERVPROC 12/18/03 10:12:22 Remote Login successful.
Login ID: ’’USERID’ from web browser at IP@=192.168.70.231’
3 E SERVPROC 12/18/03 10:10:37 Failure reading I2C device.
4 E SERVPROC 12/18/03 10:10:37 Environmental monitor not responding.
5 E SERVPROC 12/18/03 10:10:37 Failure reading I2C device.
x345RSA> readlog
6 E SERVPROC 12/18/03 10:09:31 Fan 2 Fault. Multiple fan failures
7 E SERVPROC 12/18/03 10:09:31 Fan 1 Fault. Single fan failure
94 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide