Filter
Top Products
Option Description
-exp Maximum password age [0 - 365] days. Set to 0 for no expiration.
-cnt Number of previous passwords that cannot be reused [0 - 5]
-nul Allows accounts with no password [yes | no]
-h Displays the command usage and options
Example
x345RSA> passwordcfg
Security Level: Legacy
x345RSA> passwordcfg -exp 365
ok
x345RSA> passwordcfg -nul yes
ok
x345RSA> passwordcfg -cnt 5
ok
x345RSA> passwordcfg
Security Level: Customize
-exp: 365
-cnt: 5
-nul: allowed
portcfg command
Note: The portcfg command is not available for the Remote Supervisor Adapter II
SlimLine.
Syntax
portcfg com1 [options]
portcfg com2 [options]
options:
-serred serial_redirect_mode
-b baud_rate
-p parity
-s stop_bits
-climode cli_mode
-cliauth cli_auth
Description
Use the portcfg command to configure the serial port. Type portcfg com1 or
portcfg com2 to display the port configuration. To change the serial port
configuration, type the options, followed by the values. To change the serial port
configuration, you must have at least Adapter Networking and Security
Configuration authority.
The following table shows the arguments for the options.
Option Description Values
-serred Serial redirect mode disabled, enabled
-b Baud rate 2400, 4800, 9600, 19200, 38400, 57600, 115200
-p Parity none, odd, even, mark, space
-s Stop bits 1, 2
Chapter 6. Command-line interface 103