Filter
Top Products
You can view and change the account security management configuration on
the Custom Security Settings page. When you change the User login
password required setting, you must also have a password, to be consistent
with the requirement.
User login password required
Use this field to indicate whether a login ID with no password is
allowed.
Number of previous passwords that cannot be used
Use this field to indicate the number of previous passwords that cannot
be reused. Up to five previous passwords can be compared. Select 0 to
allow the reuse of all previous passwords.
Maximum Password Age
Use this field to indicate the maximum password age that is allowed
before the password must be changed. Values of 0 to 365 days are
supported. Select 0 to disable the password expiration checking.
9.
Click Save.
Configuring remote alert settings
Note: For the Remote Supervisor Adapter II SlimLine, the configuring remote alert
settings feature is available only when using LAN-based alert functionality.
You can configure remote alert recipients, the number of alert attempts, incidents
that trigger remote alerts, and local alerts from the Alerts link on the navigation
pane.
After you configure a remote alert recipient, the Remote Supervisor Adapter II will
send an alert to that recipient. The alert is sent through a serial connection or a
network connection, a numeric pager, or an alphanumeric pager when any event
selected from the Monitored Alerts group occurs. This alert contains information
about the nature of the event, the time and date of the event, and the name of the
system that generated the alert.
The Remote Supervisor Adapter II offers alert redundancy for several managed
systems at the same location. It sends alerts only once per connection type, even
when there is more than one active LAN or serial connection. However, if one
connection device fails, all other interconnected devices route the alerts to the next
available connection.
Notes:
1. If the SNMP Agent or SNMP Traps fields are not set to Enabled, no SNMP
traps are sent. For information about these fields, see “Configuring SNMP” on
page 43.
22 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide