Filter
Top Products
Parameters
The following parameters are presented in the option status display for the ssl
command and are output only from the command-line interface:
Server secure transport enable
This status display is read-only and cannot be set directly.
Server Web/CMD key status
This status display is read-only and cannot be set directly. Possible
command line output values are as follows:
Private Key and Cert/CSR not available
Private Key and CA-signed cert installed
Private Key and Auto-gen self-signed cert installed
Private Key and Self-signed cert installed
Private Key stored, CSR available for download
SSL
server CSR key status
This status display is read-only and cannot be set directly. Possible
command line output values are as follows:
Private Key and Cert/CSR not available
Private Key and CA-signed cert installed
Private Key and Auto-gen self-signed cert installed
Private Key and Self-signed cert installed
Private Key stored, CSR available for download
SSL
client LDAP key status
This status display is read-only and cannot be set directly. Possible
command line output values are as follows as follows:
Private Key and Cert/CSR not available
Private Key and CA-signed cert installed
Private Key and Auto-gen self-signed cert installed
Private Key and Self-signed cert installed
Private Key stored, CSR available for download
SSL
client CSR key status
This status display is read-only and cannot be set directly. Possible
command line output values are as follows:
Private Key and Cert/CSR not available
Private Key and CA-signed cert installed
Private Key and Auto-gen self-signed cert installed
Private Key and Self-signed cert installed
Private Key stored, CSR available for download
tcpcmdmode command
Syntax
tcpcmdmode [options]
options:
-t seconds
-status on|off
Description
Use the tcpcmdmode command to display and change configuration parameters
for the TCP command mode sessions. You must have at least Adapter
106 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide