Filter
Top Products
Table 1. Remote Supervisor Adapter II actions (continued)
Link Action Description
Access Remote
ASM
2
Access other service processors
on the ASM interconnect network
From the Access Remote ASM page, you can view a list of
service processors that are present on the ASM
interconnect network and establish a connection to any of
those systems.
Note: Service processors are Remote Supervisor Adapter
IIs, Remote Supervisor Adapters, ASM processors, ASM
PCI adapters, and integrated system management
processors (ISMPs).
System Settings View and change the Remote
Supervisor Adapter II system
settings
You can configure the server location and general
information, such as the name of the Remote Supervisor
Adapter II, the operating system that supports the Remote
Supervisor Adapter II (Windows or Linux), server timeout
settings, and contact information for the Remote
Supervisor Adapter II, from the System Settings page.
Set the Remote Supervisor
Adapter II clock
You can set the Remote Supervisor Adapter II clock that is
used for time stamping the entries in the event log.
Login Profiles Configure the Remote Supervisor
Adapter II login profiles and global
login settings
You can define 12 login profiles that enable access to the
Remote Supervisor Adapter II. You can also define global
login settings that apply to all login profiles, including
enabling Lightweight Directory Access Protocol (LDAP)
server authentication and customizing the account security
level.
Alerts Configure remote alerts and
remote alert recipients
You can configure the Remote Supervisor Adapter II to
generate and forward alerts for a number of different
events. On the Alerts page, you can configure the alerts
that are monitored and the recipients that are notified.
Configure local events You can set the local events that are monitored by the
Remote Supervisor Adapter II, for which notifications are
sent to the IBM Director console.
Configure alert settings You can establish global settings that apply to all remote
alert recipients, such as the number of alert retries and the
delay between the retries.
Serial Port Configure the Remote Supervisor
Adapter II serial ports
1
and
modem settings
2
From the Serial Port page, you can configure the serial
ports
1
and modem settings
2
that are used by the Remote
Supervisor Adapter II. You can also configure the serial
redirect and command-line interface (CLI) settings.
1
Port assignments Change the port numbers of the
Remote Supervisor Adapter II
protocols.
From the Port Assignments page, you can change the port
numbers of Remote Supervisor Adapter II protocols (for
example, HTTP, HTTPS, Telnet, and SNMP).
Network Interfaces Configure the network interfaces
of the Remote Supervisor Adapter
II
From the Network Interfaces page, you can configure
network-access settings for the Ethernet connection on the
Remote Supervisor Adapter II. The Remote Supervisor
Adapter II Ethernet connection enables remote access
using a Web browser. You can also configure the
point-to-point protocol (PPP) access through the Remote
Supervisor Adapter II serial port.
Network Protocols Configure the network protocols of
the Remote Supervisor Adapter II
You can configure Simple Network Management Protocol
(SNMP), Domain Name System (DNS), and Simple Mail
Transfer Protocol (SMTP) settings that are used by the
Remote Supervisor Adapter II from the Network Protocols
page. You can also configure LDAP parameters.
Chapter 2. Opening and using the Web interface 9