Filter
Top Products
Table 4-1 (Page 8 of 11). Firmware Error Codes
Error Code Function /
Description
Repair Action/Possible Failing FRU
25A80998 NVRAMRC script
evaluation error -
command line
execution error
Execution of a command line within the nvram
configuration variable “nvramrc” (script) resulted in a
“throw” being executed. This script can be modified by
the system firmware SMS utilities, the operating
system, PCI adapter rom code or utility, or an operator
(via the open firmware script editing command
“nvedit”). It may not be possible to resolve the
problem without a detailed analysis of the nvram script,
the current system configuration, and device tree
contents.
1. The problem can be caused by a SCSI
adapter,whose SCSI bus ID has been changed
from the default setting, no longer appearing in the
system. This can be caused either by removing a
SCSI adapter, or a problem with a SCSI adapter.
a. Select the “SCSI ID” utility from the SMS
menu(s).
1) Verify the list of SCSI controllers/adapters.
If the list is not correct, suspect a problem
with the adapter(s) installed but not listed.
2) Select the option to “Save” the
configuration information.
3) Restart the system.
b. If the problem persists, boot the operating
system and verify the SCSI bus IDs of any
installed/available SCSI controllers (change as
necessary), and restart the system.
2. Contact your service support representative for
further assistance.
EEPROM problems
EEPROM problem resolution:
1. Ensure that the EEPROM Security jumper is in the correct position if doing a PAP install.
2. Retry the operation.
3. If retries do not solve the problem, replace the System Planar.
25AA0000 Unable to unlock
eeprom
Refer to EEPROM problem resolution above
25AA0001 Read-Recv error Refer to EEPROM problem resolution above
25AA0002 Read-Trans error Refer to EEPROM problem resolution above
25AA0003 Write-enable error Refer to EEPROM problem resolution above
25AA0004 Write-recv error Refer to EEPROM problem resolution above
25AA0005 Write-disable error Refer to EEPROM problem resolution above
25AA0006 Write-Trans error Refer to EEPROM problem resolution above
4-8 7043 43P Series Service Guide