Filter
Top Products
Text-Based System Management Services
The text-based Open Firmware command line and System Management Services are
available if an ASCII terminal is attached to your system unit.
To start the text-based System Management Services instead of the Open Firmware
command line, press 1 on the ASCII terminal keyboard when the keyboard text
symbol appears during startup.
After the text-based System Management Services starts, the following screen
appears.
Note: The version of firmware currently installed in your system unit is displayed at
the top of each screen in the text-based System Management Services.
Please note the version number; processor upgrades may require a specified
version of firmware to be installed in your system unit. Update System
Firmware is an option under the Utilities menu.
System Management Services
1 Display Configuration
2 Select Boot Devices
3 Utilities
4 Select Language
.------.
|X=Exit|
------'
====>
Figure 7-1. Text-based System Management Services - Main Menu (Model 140 and Model 240)
7-26 7043 43P Series Service Guide