IBM SA38-0512-03 Server User Manual


 
Chapter 2. Maintenance Analysis Procedures (MAPs)
This chapter contains Maintenance Analysis Procedures (MAPs) for the Model 140,
Model 150, and Model 240.
Entry MAP
Notes:
1. When possible, run Online Diagnostics in Service Mode. Online Diagnostics
perform additional functions, compared to Standalone Diagnostics. This ensures
that the error state of the system is captured in NVRAM for your use in fixing the
problem. The AIX error log and SMIT are only available when diagnostics are
run from the hard drive.
2. Licensed programs frequently rely on either network configuration, vital product
data (VPD) stored on the operator panel control assembly, or system board
information to authorize program use. If the MAPs indicate that the network
adapter, operator panel, or system board should be replaced, notify the system
owner that new keys for licensed programs may be required.
3. If a network adapter or the system board is replaced, the network administrator
must be notified so that the client IP addresses used by the server can be
changed. In addition, the operating system configuration of the network
controller may need to be changed in order to enable system startup, and any
client or server that addresses this system should be updated. After completing
the recommended actions in this chapter, go to "MAP 0410: Repair Checkout" in
the
Diagnostics Information for Multiple Bus Systems
.
Chapter 2. Maintenance Analysis Procedures (MAPs) 2-1