IBM SA38-0512-03 Server User Manual


 
6. If you are removing a 3.5-inch disk drive, remove the screws which secure the
disk drive mounting brackets to the disk drive.
Note: The screws which secure disk drive mounting brackets to a disk drive are
not the same as those used in the the rest of the assembly. Be sure to
retain these screws in order to attach the disk drive mounting brackets on
the replacement disk drive.
Replacement: To replace, perform the removal steps in the reverse order. Be
sure to match the SCSI addresses of the replacement disk drives with those of the
removed disk drives. Recommended SCSI addresses are shown in the illustration
on page 8-13
Chapter 8. Removal and Replacement Procedures 8-17