Filter
Top Products
Table 4-1 (Page 10 of 11). Firmware Error Codes
Error Code Function /
Description
Repair Action/Possible Failing FRU
26020006 PCI adapter
firmware failed
evaluation (has a
bug)
1. Update card firmware
2. Move card to another slot
3. Run AIX adapter diagnostics
4. Replace card
5. Update system firmware
6. Replace power supply
26020007 Unable to allocate
Bus resources to
PCI adapter (partial
allocation may have
succeeded)
1. Move card to another slot (bridge)
2. Update card firmware
3. Run AIX adapter diagnostics
4. Replace card
5. Update system firmware
6. Replace power supply
RTC errors
RTC problem resolution:
1. Errors reported against the Real Time Clock can be caused by low Battery voltage and (more
rarely) power outages that occur during normal system usage. Most of these errors are really just
warnings that the Real Time Clock data content needs to be re-established and do not require
any FRU replacement unless the error is persistent. When one of these errors occurs, the Power
On Password and Time and Date information has probably been lost.
To set/restore a Power On Password, use the S.M.S. utility.
To set/restore the Time and Date, use the Operating System facility.
2. If the error is persistent, replace the battery on the System Planar.
3. If the error is persistent after battery replacement, replace the System Planar.
28030001 RTC initialization
required - RTC not
updating, corrected
1. Set/Restore the Time and Date
2. Refer to RTC problem resolution above if problem
persists.
28030002 Bad time/date
values
1. Set the Time and Date
2. Refer to RTC problem resolution above if problem
persists.
28030003 RTC initialization
required - RTC not
updating, not
corrected
1. Replace the System Planar.
28030004 RTC operating
mode parameters
changed (ie. data
format)
1. Set/Restore the Time and Date
2. Refer to RTC problem resolution above if problem
persists.
28030005 RTC Battery error 1. Replace the battery
Note: Password, Time, and Date needs to be set
2. Refer to RTC problem resolution above if problem
persists.
Keyboard/Mouse problems
4-10 7043 43P Series Service Guide