IBM SA38-0512-03 Server User Manual


 
Table 4-3 (Page 6 of 13). Firmware Checkpoints
Checkpoint
(hex)
Description Repair Action
E15F Adapter VPD probe See “Unresolved problems” on page 4-26
E160 CPU Node VPD
Creation
See “Unresolved problems” on page 4-26
E161 ROOT Node VPD
Creation
See “Unresolved problems” on page 4-26
E162 SP Node VPD
Creation
See “Unresolved problems” on page 4-26
E164 Create PCI graphics
node (P9)
See “Unresolved problems” on page 4-26
E168 Create PCI graphics
node (S3)
See “Unresolved problems” on page 4-26
E16C GXT1000P
Subsystem Open
request
See “Unresolved problems” on page 4-26
E16D GXT1000P Planar
not detected/failed
diagnostics
See “Unresolved problems” on page 4-26
E16E GXT1000P
Subsystem Open
successful
See “Unresolved problems” on page 4-26
E16F GXT1000P Close
Subsystem
See “Unresolved problems” on page 4-26
E170 Start of PCI Bus
Probe
See “Unresolved problems” on page 4-26
E171 Executing PCI-Delay
function
See “Unresolved problems” on page 4-26
E174 Establish host
connection
Refer to “Boot Problems/Concerns” on page 4-27 for
some general information concerning network booting.
E175 BootP request Refer to “Boot Problems/Concerns” on page 4-27 for
some general information concerning network booting.
1. Power Off then On and retry the boot operation
2. Verify the network connection
3. Have network administrator verify the server
configuration for this client
E176 TFTP file transfer See “Unresolved problems” on page 4-26
E177 Transfer failure due
to TFTP error
condition
See “Unresolved problems” on page 4-26
E178 Create PCI token
ring node
See “Unresolved problems” on page 4-26
4-18 7043 43P Series Service Guide