Filter
Top Products
Ingenico 6500 User’s Guide 11
Chapter 3
System Configuration Menu
3.1 Overview
This chapter explains how to perform the functions in the system configuration menu: change
date and time, set display contrast, and adjust beep tones (length and tone).
3.2 Changing the Date and Time
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [Enter] to select System Config.
System Config
System Date/Time
Display Contrast
Press [Enter] to select System Date/Time.
Enter Date
YYYY/MM/DD
2003/08/22
Key the new date using the format YYYYMMDD,
then press [Enter]. To bypass, press [Enter].
Enter Time
HH:MM
17:21
Key the new time using the format, HHMM, then
press [Enter]. The system uses a 24-hour clock.
To bypass, press [Enter].