Filter
Top Products
40 Chapter 6 System Parameters Menu
Section 6.4 Setting Up the Port
6.4.4 Setting the Stop Bits
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Press [], [], [], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Press [], [], [Enter] to select Setup Port.
Setup Port
Port1
Port2
Port3
Select Port1, Port2, or Port3.
(By default, Port 1 = Host, Port 2 = Aux, Port 3 =
E-NET port - Ethernet.)
Set Port X
Interface Type
Baud Rate
Data Bits
Stop Bits
Press [], [], [Enter] to select Stop Bits.
Stop Bits
1
2
Select the appropriate stop bits value.
Updating