Filter
Top Products
Ingenico 6500 User’s Guide 83
7.13 Testing Pen Calibration
If your terminal is not correctly interpreting pen touches, use this test to adjust the pen
calibration. This test is for the i6550 only.
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Diagnostic Menu
Press [], [Enter] to select Diagnostic Menu.
Diagnostic Menu
Display
Keypad
Beeper
RS232
Tailgate
USB
Mag Stripe Reader
Smart Card Reader
SAM
Touch Screen
Signature Capture
Pen Calibration
Press [], [Enter] to select Pen Calibration.
Please remove hands/objects
from around the display
Calibration will start in 3
seconds…
Using the stylus, tap the four-box grid. The box
moves around to the next corner; tap again.
Repeat until you are notified if the test was
successful.
Calibrate Pen
Please tap box