Filter
Top Products
80 Chapter 7 Diagnostic Menu
Section 7.10 Testing the SAMs
7.10 Testing the SAMs
This feature tests communication between the SAM slots and the SAM micro-controller (SMC).
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Diagnostic Menu
Press [], [Enter] to select Diagnostic Menu.
Diagnostic Menu
Display
Keypad
Beeper
RS232
Tailgate
USB
Mag Stripe Reader
Smart Card Reader
SAM
Press [], [Enter] to select SAM.
SAM
Found SAM Slot1.
Found SAM Slot2.
Found SAM Slot3.
Found SAM Slot4.
SAM
Check Slot2 ATR
Read data from Slot2
(Result)
ATR means answer to reset.
SAM
Power off all slots
Close all smc slots
SMC stands for SAM micro-controller.