Filter
Top Products
44 Chapter 6 System Parameters Menu
Section 6.4 Setting Up the Port
6.4.8 Setting the Response Timeout
This option sets the amount of time after which the port should cease waiting for a response,
in units of 1/100 of a second.
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Press [], [], [], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Press [], [], [Enter] to select Setup Port.
Setup Port
Port1
Port2
Port3
Select Port1, Port2, or Port3.
(By default, Port 1 = Host, Port 2 = Aux, Port 3 =
E-NET port - Ethernet.)
Port X
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
LAN Address
Retry Count
Response TMO
Press [] six times, and then press [Enter] to
select Response TMO (timeout).
Response TMO
Old Value: 300
Enter New Value:
Enter an amount of time after which the port
should cease waiting for a response, in units of
1/100 of a second.