Filter
Top Products
38 Chapter 6 System Parameters Menu
Section 6.4 Setting Up the Port
6.4.2 Setting the Baud Rate
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Press [], [], [], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Press [], [], [Enter] to select Setup Port.
Setup Port
Port1
Port2
Port3
Dial
Select the port you want (By default, Port 1 = Host,
Port 2 = Aux, Port 3 = E-NET port - Ethernet, Dial
= I.T.I.).
Port X
Interface Type
Baud Rate
Data Bits
Stop Bits
Press [], [Enter] to select Baud Rate.
If configuring the Dial port (I.T.I. port), select
Modem Speed.
Baud Rate
300
600
1200
Select the appropriate baud rate (you can scroll
down to see more options).
Updating
Press [Can] to return to the previous menu.