Filter
Top Products
Ingenico 6500 User’s Guide 61
6.5.3 Setting the Auto Detect Retry Times
The Auto Detect Retry Times indicates how many times the terminal will attempt a
communications protocol before trying the next one on the list. For example, if it is set to 3,
when the terminal starts up, it will try 3 times to connect to the HOST in USB mode. If it fails,
then it will try 3 times to connect to the HOST in RS485 mode. If it fails, then it will try 3 times
to connect to the host in Tailgate mode. If it fails, then it will decide that COM1 is working in
RS232 mode. Therefore, the less retry times, the less amount of time it will take to auto-detect
the communications type.
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Press [], [], [], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Auto Detect
Press [], [], [], [Enter] to select Auto Detect.
Auto Detect
AD On/Off
AD Timeout
AD Retry Times
Press [], [], [Enter] to select AD Retry Times.
AD Retry Times
Old Value: XXXXX
Enter New Value:
The current value displays. Enter the number of
times to retry the auto-detection of the Host port,
from 0 to 10.