Filter
Top Products
24 Chapter 5 Supervisor Menu
Section 5.1 Overview
Chapter 5
Supervisor Menu
5.1 Overview
This chapter explains how to change the supervisor password, check or erase the application
file in the terminal, and perform the following security functions: set key injection port, allow
key injection, check the key value, and allow the serial key to be injected.
5.2 Supervisor Menu Password
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Note: If an incorrect password is entered, the
message Password Invalid displays, then a
prompt asks you to reenter the password.
5.3 Changing the Supervisor Menu Password
The password is stored in the internal SRAM.
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].