Filter
Top Products
Ingenico 6500 User’s Guide 35
Chapter 6
System Parameters Menu
6.1 Overview
This chapter explains how change system parameters. These parameters allow you to indicate
the download method, set the download port, setup the port, and configure the host port’s auto
detect feature.
To view a list of current parameter settings, see Viewing All Parameter Values on page 20.
All system parameters are saved in the public file, sysPara.cfg, which can be read by all
applications that reside in the terminal.
6.2 Setting the Download Method
Use this procedure to select IBMEFT, NCREFT, or Zontalk as your download method.
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Press [], [], [], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Press [Enter] to select Download Method.
Download Method
IBMEFT
NCREFT
Zontalk
Select the method you want.
Note: The default is IBMEFT.