Filter
Top Products
84 Chapter 7 Diagnostic Menu
Section 7.14 Testing Finger Calibration
You are notified if the calibration succeeded or
failed.
7.14 Testing Finger Calibration
If your terminal is not correctly interpreting finger touches, use this test to adjust the finger
calibration. This test is for the i6550 only.
Display Action
To access the extended menu, restart the
terminal by pressing [1] + [CAN] + [OK]; while
the terminal is starting up, access the extended
menu by pressing the [1] and [3] keys
simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Diagnostic Menu
Press [], [Enter] to select Diagnostic Menu.
Diagnostic Menu
Display
Keypad
Beeper
RS232
Tailgate
USB
Mag Stripe Reader
Smart Card Reader
SAM
Touch Screen
Signature Capture
Pen Calibration
Finger Calibration
Press [], [Enter] to select Finger Calibration.
Please remove
hands/objects from
around the display,
calibration will start in 3
seconds…
Calibrate Pen
Calibration Succeeded!