Filter
Top Products
58 Chapter 6 System Parameters Menu
Section 6.4 Setting Up the Port
6.4.23 Changing the Position of the Host Port or Aux Port
The ports are labeled Host, Aux, E-NET, I.T.I., and by default, Port 1 = Host, Port 2 = Aux,
Port 3 = Ethernet. However, you may configure Port 1, 2, or 3 as the Host port or Aux port
through this menu option. For example, if your host uses Ethernet, you may set your host port
as Port 3.
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Press [], [], [], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Press [], [], [Enter] to select Setup Port.
Setup Port
Port1
Port2
Port3
Dial
Host Port
Aux Port
Press [] until you reach Host or Aux port, and
then press [Enter].
Dial
COM1
COM2
COM3
Select the COM port you want.
Updating