Filter
Top Products
Ingenico 6500 User’s Guide 47
6.4.11 Defining the DHCP Address
DHCP is dynamic host configuration protocol. If the terminal is working in Ethernet mode, and
if DHCP is ON, the terminal can ask the remote server to assign an IP address for it.
Display Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Press [], [], [], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Press [], [], [], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Press [], [], [Enter] to select Setup Port.
Setup Port
Port1
Port2
Port3
Press [], [], [Enter] to select Port3, the E-NET
port - Ethernet.
Port3
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
Retry Count
Response TMO
DHCP
Press [] seven times, then press [Enter] to select
DHCP.
DHCP
None
Auto
Select None or Auto, and then press [Enter].
Updating