Intel SE8500HW4 Server User Manual


 
Intel® Server Board Set SE8500HW4 BIOS User Interface
Revision 1.0
Intel order number D22893-001
107
Table 81. COM1 Console Redirection Menu
Setup Item Option Default Help Text Comment
BIOS Console
Redirection
Enabled/
Disabled
Disabled Enables performing server
management tasks over
the serial port.
Flow Control None
RTS/CTS
XON/XOFF
CTS/RTS + CD
None
Selects serial port
communication protocol
handshaking type.
Baud Rate 9600/19.2K/38.4
K/57.6K/115.2K
19.2K Selects serial port
transmission speed. The
speed must be matched on
the other side. Long or
noisy lines may require
lower speeds.
Terminal Type VT100/
VT100+/
VT-UTF8/
PC-ANSI
VT100+ VT100/VT100+ selection
only works with English
language. VT-UTF8 uses
Unicode. PC-ANSI is the
standard PC-type terminal.
Table 82. FRU Information Menu
Setup Item Option Default Help Text Comment
Board Part
Number
<string from
the FRU>
Info Only
Board Serial
Number
<string from
the FRU>
Info Only
System Part
Number
<string from
the FRU>
Info Only
System Serial
Number
<string from
the FRU>
Info Only
Chassis Part
Number
<string from
the FRU>
Info Only
Chassis Serial
Number
<string from
the FRU>
Info Only
BMC Device ID <string from
the BMC>
Device identification number
of the Baseboard
Management Controller
Info Only
BMC Firmware
Revision
<string from
the BMC>
Info Only
BMC Device
Revision
<string from
the BMC
Info Only
PIA Revision <string from
the BMC>
Info Only
SDR Revision <string from
the BMC>
Info Only
Hot Swap
Controller
<string from
the Hot Swap
Revision of the Hot Swap
Back Plane (HSBP) controller
Info Only