Filter
Top Products
104 Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual
Using the Web Console
To configure DNS Relay
1. In the left panel, click Switch Utilities.
2. In the top panel under Others, click DNS Relay.
3. Configure these fields.
4. Click
Apply.
To configure the static DNS table
The DNS table specifies where the DNS servers are located in terms of IP addresses and subnet
names (IP interface names).
1. In the left panel, click
Switch Utilities.
2. In the top panel under Others, click DNS Relay - Static Table Configurations.
3. Click
New and configure these fields:
4. Click
Apply.
5. To remove an entry, highlight it in the DNS Static Table and click
Delete.
Network Monitoring
This section explains how to monitor the following aspects of the switch:
• “Port Statistics” (packets, errors, and utilization)
• “Address Tables” (MAC, IP, Routing, and ARP)
• “Status” (switch history, router port table, IP multicast forwarding table, and other such tables)
Field Description
DNS Relay State Enables or disables DNS relay on the switch.
Name Server [1} Specifies the IP address of the primary DNS server.
Name Server [2] Specifies the IP address of a secondary DNS server.
DNS Relay Cache Status Enables or disables the DNS cache on the switch.
DNS Static Table Lookup Status
Enables or disables the DNS Static Table Lookup function on the
switch.
Field Description
Domain Name Specifies the name of the DNS server.
IP Address Specifies the IP address of the DNS relay server.
Status Enables or disables the entry for static look up.