Filter
Top Products
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual 117
Using the Web Console
4. Click Apply.
5. To delete a route, select the entry in the static/default route table and click
Delete.
To configure static ARP
The ARP table maps an IP address to a device’s MAC address.
1. In the left panel, click
Forwarding.
2. In the top panel under IP Forwarding, click
Static ARP.
3. Click
New and configure these fields.
4. Click
Apply.
5. To delete a route, select the entry in the static ARP table and click
Delete.
IP Address Filtering
You can manually configure the switch to drop packets from specified MAC and IP addresses. For
information about specifying MAC addresses to drop, see the
Forwarding | Unicast MAC
Address Setting
screen.
To specify an IP address for filtering
1. In the left panel, click IP Address Filtering.
2. Click
New and configure these fields.
Subnet Mask Specifies the corresponding subnet mask for the IP address.
Gateway IP
Specifies the address of the next hop gateway for the IP address. This is
usually a router with a connection to a WAN or the Internet.
Metric
Specifies the Routing Information Protocol (RIP) metric. This is the number
of hops between the IP address and the gateway. This is a number between
1—15.
Field Description
Field Description
Interface Name
Specifies the IP interface of the IP address that you are adding to the static
ARP table.
IP Address field Specifies the IP address of the end node or station.
MAC Address Specifies the MAC address corresponding to the IP address.
Field Description
IP Address Specifies the IP address of the packets you want dropped.