Filter
Top Products
88 Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual
Using the Telnet Console
To configure a static router port
1. From the Main Menu, select Layer 3 - IP Networking Setup | Static Router Port Settings
and press Enter.
2. Toggle the Action field to
Add/Modify and configure these fields.
3. Highlight
APPLY and press Enter.
4. To delete an entry, toggle the Action field to
Delete and enter the VLAN name of the VLAN
for which the router port table entry is to be deleted. Highlight
APPLY and press Enter.
Field Description
VLAN Name Specifies the name of the VLAN the static router port resides on.
Router Port
Specifies the ports that you want to set up as static router ports. Each port
can be set individually as a router port by highlighting the port's entry using
the Arrow keys. Use the spacebar to toggle between M (member) and -
(non-member).